Honda Maintenance Minder Codes Explained: What A, 0 and Sub-Codes 1 to 9 Mean
A short message pops up on your Honda's dashboard: "Service Due Soon," followed by a letter and a number or two. If you have ever wondered what A1 or 0 2 really means, you are in good company.
Those codes come from Maintenance Minder, the system Honda uses to tell you what your vehicle needs and when. Once you know how to read them, booking the right service becomes simple. Here is a plain-language guide to every code.
What Is Honda Maintenance Minder?
Maintenance Minder is a maintenance management system that monitors certain parts of your gas-powered Honda. When it decides service, repair or replacement is due, it shows a code on your dashboard.
The system does more than count kilometres. It estimates your remaining engine oil life using sensors in the engine and calculations based on speed, temperature and how long your vehicle operates in more severe conditions.
When estimated oil life drops to 15%, Maintenance Minder alerts you with a "Service Due Soon" message. That message includes a main code and, when other work is due at the same visit, one or more sub-codes.
Which Honda Models Use the A/0 Schedule?
Most late-model Honda vehicles follow what Honda calls the A/0 Maintenance Schedule. It applies to these models:
2016 and newer Civic, 2017 and newer CR-V, and 2018 and newer Accord
2018 and newer Odyssey, 2019 and newer Pilot and Passport, and 2023 and newer HR-V
The 2018 to 2021 Insight follows it too. Many older Honda models, such as the 2006 to 2015 Civic and the 2007 to 2016 CR-V, use the earlier A/B schedule. More on that below.
Main Codes: A and 0
Every Maintenance Minder alert starts with a main code. On the A/0 schedule, there are two.
Code A means it is time to replace the engine oil.
Code 0 means it is time to replace both the engine oil and the oil filter.
One rule applies to both codes. If 12 months pass and the oil life still has not run out, Honda recommends replacing the oil once a year anyway.
Sub-Codes 1 to 9: What Each Number Means
Sub-codes appear next to the main code and flag extra work due at the same visit. A message reading "A 1 2," for example, calls for an oil change, a tire rotation and the items under code 2.
| Code | Service Required | Good to Know |
|---|---|---|
| 1 | Rotate tires | Timing set by Maintenance Minder |
| 2 | Replace engine air filter and cabin air filter, inspect drive belts | On dusty gravel roads or in areas with visible soot, replace both filters every 24,000 km |
| 3 | Replace transmission fluid (plus clutch fluid on manual models and transfer fluid on V6 AWD models) | If you regularly tow or drive slow, steep mountain roads, replace transmission fluid every 40,000 km |
| 4 | Replace spark plugs, inspect valve clearance (plus timing belt replacement and water pump inspection on V6 models) | In frequent extreme temperatures above 43°C or below -30°C, replace the V6 timing belt every 100,000 km |
| 5 | Replace engine coolant | Timing set by Maintenance Minder |
| 6 | Replace rear differential fluid (AWD models) | For heavy towing or mountain driving, change it first at 12,000 km, then every 24,000 km |
| 7 | Replace brake fluid | If code 7 has not appeared within 36 months of the last brake fluid service, replace it every 3 years |
| 9 | Service front and rear brakes, plus a full inspection | Covers parking brake adjustment, tie rod ends, steering gear box, suspension, driveshaft boots, brake hoses and lines, fluid levels, exhaust, fuel lines and tire repair kit sealant |
How the A/B Schedule Differs
Older Honda models on the A/B schedule work much the same way, with one main difference. Code A still means an oil change, but Code B covers an oil and filter change plus a brake inspection and a broader vehicle inspection.
Sub-codes on the A/B schedule follow a similar pattern for tires, filters, transmission fluid, spark plugs, coolant and rear differential fluid. Brake fluid on these models is replaced every 3 years.
What Maintenance Minder Does Not Track
Maintenance Minder is a planning tool, and it works best alongside regular checks. The system focuses on expected wear and preventive maintenance, so a few things stay outside its view.
It does not monitor your engine oil level, so check your oil regularly using the steps in your owner's manual.
It also cannot measure tire tread depth, brake pad and rotor wear, or battery life. Instead, it schedules service and inspection intervals to reduce the chance of an unexpected wear-out.
Heavy trailer towing and very dusty conditions can call for extra filter or fluid changes beyond the regular schedule. During your service visit, a multi-point inspection helps confirm whether those extra items are needed.
Finally, Maintenance Minder is not a health check. Leaks, warning lights that stay on or strange noises deserve a visit to your Honda dealer for diagnosis, no matter what the Minder shows.
What Happens After Your Service
Once the work is complete, your Honda technician resets Maintenance Minder based on the service performed. That reset lets the system calculate what your vehicle will need at the next visit.
Honda technicians are factory-trained and use only genuine Honda parts. Every code you clear keeps your Honda's service history on track.
Book Your Next Service at Waterloo Honda
A code on your dashboard is simply your Honda asking for a little attention, and there is no need to guess what it means.
Book your next visit with the service team at Waterloo Honda in Waterloo, and our factory-trained technicians will take care of every item on your Maintenance Minder list, reset the system and answer any questions about your vehicle's care along the way.





























